Main features
Produktbeschreibung | APC Back-UPS BX Series BX1600MI-GR - USV - 900 Watt - 1600 VA |
Type | (Offline) UPS |
Gerätetyp | USV - extern |
Weight | 10.3 kg |
Input voltage | Wechselstrom 230 V |
Ausgangsspannung | Wechselstrom 230 V ± 10% |
Leistungskapazität | 900 Watt / 1600 VA |
Eingangsanschlüsse | 1 |
Ausgabeanschlussstellen | 4 x Stecker Typ F |
Batterie | Bleisäure - 7 Ah |
Anz. Batterien | 2 |
Betriebszeit (bis zu) | 6.5 Min. bei halber Last |
Abmessungen (Breite x Tiefe x Höhe) | 14 cm x 39 cm x 19 cm |
General
Gerätetyp | USV - extern |
Stromversorgungsgerät
UPS-Technologie | Line-Interactive |
Input voltage | Wechselstrom 230 V |
Eingangsspannungsbereich | AC 140 - 300 V |
Vorhandene Spannung | 50/60 Hz |
Nötige Frequenz | 50/60 Hz |
Eingangsanschlüsse | 1 |
Angaben zu Ausgangsleistungsanschlüssen | 4 x Stecker Typ F |
Ausgangsspannung | Wechselstrom 230 V ± 10% - 50/60 Hz |
Leistungskapazität | 900 Watt / 1600 VA |
Überspannungsschutz für Datenleitungen | Netzwerk - RJ-45 - 1 Eingangs-/1 Ausgangsleitung |
Ausgabe Wellenform | Schrittweise Annäherung an eine Sinuswelle |
Energie-Nennleistung | 273 Joules |
Schutzschaltung | Trennschalter |
Batterie
Menge | 2 |
Technologie | Bleisäure |
Bereitgestellte Spannung | 12 V |
Capacity | 7 Ah |
Laufzeit (bis zu) | 6.5 min bei 50% Last ¦ 1 min bei Volllast |
Ladezeit | 8 Stunden |
Übertragungszeit | 6 ms |
Besonderheiten | Wartungsfrei, versiegelt |
Erweiterung/Konnektivität
Interfaces | 1 x USB |
Verschiedenes
Enthaltene Kabel | Stromkabel - extern - 1.2 m |
Besonderheiten | Hörbarer Alarm, Automatische Spannungsregelung (Automatic Voltage Regulation, AVR) |
Mark | CB; CE; IEC |
Software / Systemanforderungen
Software inbegriffen | APC PowerChute Personal Edition |
Herstellergarantie
Service und Support | Begrenzte Garantie - Austausch oder Reparatur - 2 Jahre |
Umgebungsbedingungen
Min Betriebstemperatur | 0 °C |
Max. Betriebstemperatur | 40 °C |
Zulässige Luftfeuchtigkeit im Betrieb | 0 - 95% |
Abmessungen und Gewicht
Width | 140 mm |
Tiefe | 39 cm |
Höhe | 19 cm |
Weight | 10.3 kg |
Abmessungen & Gewicht (Transport)
Transportbreite | 23.5 cm |
Transporttiefe | 49.5 cm |
Transporthöhe | 29.7 cm |
Transportgewicht | 11.3 kg |
Classification
eClass-10.1-ID | 27040601 |
eClass-11.1-ID | 27040601 |
eClass-6.2-ID | 27040601 |
eClass-7.1-ID | 27040601 |
eClass-8.1-ID | 27040601 |
eClass-9.1-ID | 27040601 |
eClass-ID | 19030401 |
UNSPSC 20.0601 Code | 39121011 |
custom tariff number | 85044085 |
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
PowerChute Personal Edition OS Compatibility
This software supports numerous operating systems and processors.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
PowerChute Personal Edition OS Compatibility
This software supports numerous operating systems and processors.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Review product
No review available for this product.