Deutsch
English
Main features
| Produktbeschreibung | Delock - Speichercontroller (RAID) - SATA 6Gb/s - PCIe 2.0 x1 |
| Type | Raid controller |
| Gerätetyp | Speichercontroller (RAID) - Plug-in-Karte - Low-Profile |
| Bus type | PCIe 2.0 x1 |
| Schnittstelle | SATA 6Gb/s |
| Data transfer rate | 6 Gbit/s |
| Unterstützte Geräte | Festplatte, DVD-Laufwerk, Festplatten Array (RAID), Solid State-Laufwerk |
| Anzahl Kanäle | 2 |
| Max. Anzahl Speicherperipheriegeräte | 2 |
| RAID Level | RAID 1 |
| Packaging | Retail |
| Systemanforderungen | Microsoft Windows 7 / 8.1 / 10 (32/64 bits), Linux Kernel 3.3 oder höher |
General
| Gerätetyp | Speichercontroller (RAID) - Plug-in-Karte - Low-Profile |
| Host-Bus | PCIe 2.0 x1 |
Massenspeicher-Controller
| Schnittstelle | SATA 6Gb/s |
| Data transfer rate | 6 Gbit/s |
| Unterstützte Geräte | Festplatte, DVD-Laufwerk, Festplatten Array (RAID), Solid State-Laufwerk |
| Anzahl Kanäle | 2 |
| Max. Anzahl Speicherperipheriegeräte | 2 |
| RAID Level | RAID 1 |
| Processor | ASMedia ASM1062R |
Erweiterung/Konnektivität
| Interfaces | 2 x SATA 6Gb/s - SATA (innerhalb) |
Verschiedenes
| Zubehör im Lieferumfang | Low profile Slotblech |
| Leistungsmerkmale | Hot-Swap-fähig, Native Command Queuing (NCQ), S.M.A.R.T. Unterstützung, RAID-Modus Jumper, TRIM-Support, DevSleep |
| Packaging | Retail |
Software / Systemanforderungen
| Software inbegriffen | Driver |
| Erforderliches Betriebssystem | Microsoft Windows 7 / 8.1 / 10 (32/64 bits), Linux Kernel 3.3 oder höher |
Classification
| eClass-10.1-ID | 19050190 |
| eClass-11.1-ID | 19050190 |
| eClass-7.1-ID | 19050190 |
| eClass-8.1-ID | 19050190 |
| eClass-9.1-ID | 19050190 |
| eClass-ID | 19030304 |
| UNSPSC 20.0601 Code | 43201544 |
| custom tariff number | 84718000 |
This PCI Express card by Delock expands the PC by two internal SATA ports. Different devices such as SSDs, hard drives, DVD-drives etc. can be connected to the card.
RAID 1
The special feature of this PCIe card is that an SSD / HDD, which already contains data, does not need to be formatted in order to build a RAID 1 group with a second SSD / HDD. The data of the existing SSD / HDD will be mirrored to a new one.
RAID 1
The special feature of this PCIe card is that an SSD / HDD, which already contains data, does not need to be formatted in order to build a RAID 1 group with a second SSD / HDD. The data of the existing SSD / HDD will be mirrored to a new one.
