Deutsch
English
Main features
| Produktbeschreibung | APC Easy UPS BV BV650I - USV - 375 Watt - 650 VA |
| Type | (Offline) UPS |
| Gerätetyp | USV - extern |
| Weight | 4.5 kg |
| Input voltage | Wechselstrom 230 V |
| Ausgangsspannung | Wechselstrom 230 V |
| Leistungskapazität | 375 Watt / 650 VA |
| Eingangsanschlüsse | 1 x Strom IEC 60320 C14 |
| Ausgabeanschlussstellen | 6 x Strom IEC 60320 C13 |
| Batterie | Bleisäure - 7 Ah |
| Abmessungen (Breite x Tiefe x Höhe) | 16.1 cm x 30.5 cm x 9.3 cm |
General
| Gerätetyp | USV - extern |
Stromversorgungsgerät
| UPS-Technologie | Line-Interactive |
| Input voltage | Wechselstrom 230 V |
| Eingangsspannungsbereich | AC 170 - 280 V |
| Vorhandene Spannung | 50/60 Hz ± 1Hz |
| Nötige Frequenz | 50/60 Hz ± 5Hz |
| Eingangsanschlüsse | 1 x Strom IEC 60320 C14 |
| Angaben zu Ausgangsleistungsanschlüssen | 6 x Strom IEC 60320 C13 |
| Ausgangsspannung | Wechselstrom 230 V 50/60 Hz |
| Leistungskapazität | 375 Watt / 650 VA |
| Ausgabe Wellenform | Schrittweise Annäherung an eine Sinuswelle |
| Überspannungsschutz | Ja |
Batterie
| Technologie | Bleisäure |
| Bereitgestellte Spannung | 12 V |
| Capacity | 7 Ah |
| Laufzeit (bis zu) | 10 min bei 120 Watts ¦ 6 min bei 180 Watt ¦ 2 min bei 240 Watt |
| Übertragungszeit | 6 ms |
| Besonderheiten | Wartungsfrei, versiegelt, leckagefrei |
Verschiedenes
| Enthaltene Kabel | Stromkabel 1.52 m |
| Besonderheiten | Geeignet für Wandmontage, hörbarer Alarm, Automatische Spannungsregelung (Automatic Voltage Regulation, AVR), LED-Anzeiger, Kaltstartfunktion |
| Mark | IEC |
Herstellergarantie
| Service und Support | Begrenzte Garantie - 2 Jahre |
Umgebungsbedingungen
| Min Betriebstemperatur | 0 °C |
| Max. Betriebstemperatur | 40 °C |
| Zulässige Luftfeuchtigkeit im Betrieb | 0 - 90% |
| Geräuschentwicklung | 40 dBA |
Abmessungen und Gewicht
| Width | 160 mm |
| Tiefe | 30.5 cm |
| Höhe | 9.3 cm |
| Weight | 4.5 kg |
Abmessungen & Gewicht (Transport)
| Transportbreite | 14.3 cm |
| Transporttiefe | 37.3 cm |
| Transporthöhe | 23.7 cm |
| Transportgewicht | 4.8 kg |
Classification
| eClass-10.1-ID | 27040601 |
| eClass-11.1-ID | 27040601 |
| eClass-6.2-ID | 27040601 |
| eClass-7.1-ID | 27040601 |
| eClass-8.1-ID | 27040601 |
| eClass-9.1-ID | 27040601 |
| eClass-ID | 19030401 |
| UNSPSC 20.0601 Code | 39121011 |
| custom tariff number | 85044085 |
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Audible alarms
Provides notification of changing utility power and UPS power conditions.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Wall-mount holes
Allow flexibility for setup in tight locations and mounting on wall or other surfaces.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Advanced Safety Features
Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Cold-start capable
Provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Audible alarms
Provides notification of changing utility power and UPS power conditions.
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
