Deutsch
English
Main features
| Produktbeschreibung | DIGITUS Professional Dynamic Basic Series DN-19 07U-6/6-EC Gehäuse - 7U |
| Type | Wall mount rack |
| Produkttyp | Gehäuse |
| Platzierung/Montage | Geeignet für Wandmontage |
| Colour | Grau, RAL 7035 |
| Rack-Größe | 48.3 cm (19") |
| Höhe (Rack-Einheiten) | 7U |
| Produktmaterial | Stahl |
| Abmessungen (Breite x Tiefe x Höhe) | 60 cm x 60 cm |
| Weight | 17.7 kg |
| Funktionen | Abschließbare Fronttüre, verschließbare Seitenwand, Glastür, abnehmbare Seitenteile, IP20-Schutz |
General
| Produkttyp | Gehäuse |
| Platzierung/Montage | Geeignet für Wandmontage |
| Produktmaterial | Stahl |
| Rack-Größe | 48.3 cm (19") |
| Höhe (Rack-Einheiten) | 7U |
| Width | 60 cm |
| Tiefe | 60 cm |
| Weight | 17.7 kg |
| Colour | Gray |
| Oberfläche | Pulverbeschichtung |
Verschiedenes
| Gewichtsbeschränkung | 30 kg |
| Leistungsmerkmale | Abschließbare Fronttüre, verschließbare Seitenwand, Glastür, abnehmbare Seitenteile, IP20-Schutz |
Classification
| eClass-10.1-ID | 19050601 |
| eClass-11.1-ID | 19050601 |
| eClass-6.2-ID | 19050601 |
| eClass-7.1-ID | 19050601 |
| eClass-8.1-ID | 19050601 |
| eClass-9.1-ID | 19050601 |
| eClass-ID | 19030301 |
| UNSPSC 20.0601 Code | 43201601 |
| custom tariff number | 94031058 |
The Dynamic series wall-mounted network cabinets have been developed for simple and particularly cost-optimized network expansion. The roof, base and rear panel of each cabinet are equipped with a pre-punched cable inlet. The roof chassis is also provided with a punched-out area to accommodate a fan module. Two pairs of galvanized 483 mm (19") profile rails, labelled with height units that can be read in both directions, are installed inside. These can be adjusted in depth. Each cabinet is a robust steel construction made of up to 1.2 mm thick sheet steel. The coloring takes the form of electrostatic powder coating in the standard colors grey (RAL 7035) and black (RAL 9005). Removable side panels and the lockable and removable front door improve accessibility. The door hinges can be changed. Wall mounting is carried out in two simple steps: The supplied mounting plate is screwed to the wall and then connected to the housing.
